Valves commonly used in process industry are either pneumatically operated or electrically operated depending on the availability of instrument air/power at that location and its application. The control and monitoring of the valves shall...
The paper is all about designing an automatic system which will be used to load missiles in respective canisters. Till now the loading is done manually but it takes so much time as well...
by Sunil Agarwal · Published October 25, 2016 · Last modified September 29, 2021
By Sunil Agarwal & Mohan Joshi Terminal Automation system (TAS) is a process in which a Supervisory Software System (Terminal Automation System) automates certain manual processes in a terminal. TAS is used to automate,...
by H Ramakrishna · Published October 25, 2016 · Last modified September 29, 2021
As coal is the primary fuel for a thermal power plant, adequate emphasis needs to be given for its proper handling and storage.Coal can be storedeither in open stockpiles or in covered stockpiles. In...
by Nanasaheb Wadekar, Sunil Palekar, Ravindra Patil
by Nanasaheb Wadekar, Sunil Palekar, Ravindra Patil · Published October 25, 2016 · Last modified September 29, 2021
The elevated service reservoirs form an essential part of the water supply schemes in the various part of the country. Intze type of water tank has a logical shape leading to economical design. In...
by Anjan Bhattacharya · Published October 25, 2016 · Last modified September 28, 2021
With India importing large amounts of high moisture low rank coal, there is growing interest in the potential benefits of drying the fuel prior to combustion. But what is the best way of doing...
by Mahesh Marve, Dr S Sakthivel, P V Paluskar
by Mahesh Marve, Dr S Sakthivel, P V Paluskar · Published October 25, 2016 · Last modified September 28, 2021
Generally, petrochemical products, especially polymers are derived from natural gas or crude oil (e.g. naphtha) as feedstock. The basic raw material for polymers, i.e. monomer is derived mostly from gas or liquid crackers. The...
by Surovi Ganguly · Published October 25, 2016 · Last modified August 24, 2021
Structural steel is a very versatile material and a very common material of construction in the industrial world. Structural steel has high initial cost than RCC and is used as the material of construction...
by Dr S Sakthivel · Published June 27, 2016 · Last modified August 24, 2021
Hot-spot is a phenomenon that is known to occur in photovoltaic (PV) cell under fault conditions such as partial shading, material imperfection, fabrication flaws or damages to the PV cell itself. This study focuses...
by S N Diwakar, Sagat Kathav, Prashant Yede
by S N Diwakar, Sagat Kathav, Prashant Yede · Published June 27, 2016 · Last modified December 10, 2024
The discussion in this paper outlines modularization approach for standard chemical plants. Each aspect is elaborated in general starting from conceptualization to implementation including transportation. These aspects are applicable to any plants (chemical or...
More:
Engineering the Ingot-to-Wafer Factory: Turning Solar Manufacturing Ambition into Reliable Production
Engineering Corridors of Growth: The Next Leap in India’s Infrastructure Journey
The Role of 5G in Industrial Automation
Why engineering still needs human judgment
Artificial Intelligence and India’s Sustainable Energy Transition
