by Atul Choudhari · Published October 31, 2017 · Last modified September 29, 2021
Industrial process plants handling hydrocarbons and other fuels have experienced accidental explosions. Care is taken to minimize explosions in the plant design, however when such incidents occur; the consequences can be very severe involving...
by S Jagadish, Priyanka P Swain, S V S Prasad
by S Jagadish, Priyanka P Swain, S V S Prasad · Published October 18, 2017 · Last modified September 29, 2021
The huge, ever growing demand for electrical energy has hitherto been primarily met through the combustion of fossil fuels, and conversion of heat liberated therefrom. The relentless exploitation of these non-renewable resources has raised...
by Veena Ravishankar · Published October 18, 2017 · Last modified September 28, 2021
In today’s world, ensuring plant reliability & availability is the key to sustain industries. Good news is, informed plant owners / O&M contractors are therefore today commissioning FMEA based Single Point of Failure (SPoF)...
by Suparna Ghosh, Suman Sen, Manos De
by Suparna Ghosh, Suman Sen, Manos De · Published October 18, 2017 · Last modified September 29, 2021
Introduction Plant structures are designed and constructed to resist loads envisaged to be carried based on its function and local environmental conditions. Additional requirement for the desired durability of the various structural elements are...
by Atul Choudhari · Published October 18, 2017 · Last modified September 28, 2021
Introduction Handling and management of tailings from a process plant is always a tricky and sometimes neglected part of engineering and operation. The tailings in mineral and ore processing plants contain some quantity of...
by Anjan Bhattacharya · Published July 27, 2017 · Last modified August 24, 2021
Large process plants typically demand both power and process steam at multiple pressure levels. While power demand can be met by either in-house generation or from grid or in combination of both, process steam...
This methodology of Unified controls for a Power plant is conceived by the consultants and EPC contractor to reduce life cycle costs. Our approach is designed in such way to reduce the upfront engineering...
by Dr S Sakthivel · Published October 25, 2016 · Last modified August 24, 2021
Solar Photo Voltaic (PV) Modules is a prominent renewable energy source in Indian Sub-Continent, Typical Metrological Year (TMY) data shows that favourable weather conditions prevail in various regions of the country. PV cell is...
by Sanjoy Chowdhury, Shalini Roy
by Sanjoy Chowdhury, Shalini Roy · Published October 25, 2016 · Last modified September 29, 2021
Numbers of rotating machines having wide range of frequencies operate in a thermal power plant. These machines except the Turbo-Generator are mounted on reinforced concrete block foundations. Induced Draft (ID) Fan is a rotating...
Valves commonly used in process industry are either pneumatically operated or electrically operated depending on the availability of instrument air/power at that location and its application. The control and monitoring of the valves shall...
More:
Towards Zero Carbon Steel: How Hydrogen and Renewables Can Transform the Industry
The Role of Battery Energy Storage in Enabling India’s Renewable Energy Targets
Engineering Reliability: How AI is Transforming Thermal Power Plants
Engineering Efficiency: The Role of Pelletisation in India’s Green Growth Story
The Future of Grid-Scale Energy Storage: Driving Clean and Resilient Power Systems
